Zte FSAP 9800 Technical Manual Download Page 10

Page: 10 / 116

FSAP 9800 Technical Manual

Lager Capacity

and High

Integration

1. With the backplane of full

bus, the equipment has a large

capacity.

�

The total capacity of the MDCA/MDCE backplane is up to
280 Gbit/s.

�

The switching capacity of the CSCA/CSCE/CSCT/CSCM con-
trol and switch card is 48 Gbit/s.

�

The total capacity of the MDCF is 800 Gbit/s.

�

The switching capacity of the MSCT/MSCX control and
switch card is 96 Gbit/s.

2. Supports high density

DSL

service cards (DSL2/2+ card of

32/64 lines,

VDSL

2 card of 48/64 lines,

SHDSL

card of 32 lines)

The FSAP 9800 shelf supports the following DSL subscribers:

�

896 ADSL2/2+ subscribers

�

448 SHDSL subscribers

�

448 SHDSL.bis subscribers

�

896 VDSL2 subscribers

3. Supports

PON

access (The EPN card with one

EPON

interface

and the GPNC card with two

GPON

interfaces).

FSAP 9800 shelf provides the following PON interfaces:

�

14 EPON interfaces

�

When MDCA/MDCE backplane is used, 8 GPON interfaces
are available. When the MDCF backplane is used, 14 GPON
interfaces are available.

Powerful Multicast

Service

IGMP

Snooping, Proxy and Router protocols, authority-tem-

plate based controllable multicast, up to 1024 multicast groups

2. Abundant subscriber authority modes to fulfill various multicast

demands

3. Single

PVC

multicast and multiple PVC multicast

4. Receiving video data stream through the multiple uplink inter-

faces

5. Supports the channel preview functions, able to specify the

maximum daily preview times and configure the timing preview
times resetting

6. Audience statistics

7. IGMP pre-join, quick leave, common leave and high perfor-

mance processing, suitable for BTV (Broadcast TV) over xDSL
(x Digital Subscriber Line) service.

8. Controllable multicast to control users access to multicast

groups, port bandwidth detection of multicast requests, mul-
ticast message suppression of user port level.

9. Distributed multicast, multicast plan and multi VLANs

10.

CDR

function

Abundant

Interface Types

FSAP 9800 provides various of network interfaces, service inter-
faces, maintenance interfaces and test interfaces, as shown in

Table 4

, to adapt to various networking environments. All the in-

Confidential and Proprietary Information of ZTE CORPORATION

Summary of Contents for FSAP 9800





















































































































Search results

Summary of Contents for FSAP 9800

Reviews:

Related manuals for FSAP 9800

Brands by name

Popular brands

Zte FSAP 9800, Technical Manual

Search results

Summary of Contents for FSAP 9800

Reviews:

Related manuals for FSAP 9800

Brands by name

Popular brands