PREMIER EX PLUS – OPERATION & INSTALLATION MANUAL
PAGE 5
DOCUMENT: GLT-MAN.115
ISSUE: 1 DATE: 22/8/05
AUTHOR: NRPJ
FIXING THE BACK BOX TO THE WALL
Figure 2: Plan view inside the enclosure without PCBs. Side view for surface / flush installation.
Wall Mount
Flush Mount
12 x 19mm grommet cable entries
2 x 19mm
knock-out
cable entries
355mm
275mm
250mm
195mm
60 x 20mm
back cable
entry
60 x 20mm
back cable
entry
73mm
Fix the enclosure to the wall using the three mounting holes provided.
Check the build & condition of the wall to decide a suitable screw fixing.
The mounting holes are designed for No 8 roundhead or countersunk woodscrews
(or similar).
Remove any debris from the enclosure.
Take care not to damage the FACP during installation.