Zoomlion RT35, Operator'S Manual

Page: 110 / 171

07 - 18 RT35 Rough Terrain Crane
Do not use the bypass key switch when you do usual crane operations.
 
Choose the correct line parts for the boom length and load weights. If the hook
turns because of the rope, put the load on the ground. Do not lift the load until
the rope is straight.


When you lift a load to a height that is more than usual, monitor the number of
wire-rope wraps remaining on the winch. If the load is lowered down a hole that
is deep, monitor the wire-rope. Keep a minimum of 3 wraps of rope on the winch
while you operate the crane.


Lift the load vertically. Do not try to lift the load diagonally. Do not pull a load
across the ground.


Monitor the area as you lift a load. Do not move a load unless the conditions are
safe.


Do not derrick the boom up and extend the boom at the same time if:
 
The crane has a part of the load weight.


The crane is connects to a load on the ground.
 
Do not change quickly between "reel off" and "spool up". Let the winch stop
before you continue to move the hook.
 
Do not try to lift a load that weighs more than the lift capacity of the crane.


Do not use the crane to lift personnel.
Caution
Warning