When "rESMPL" is selected as auto sync type, resampling is
carried out with the pitch shift effect applied. This may result in a
slight alteration of the sound.
When auto sync is completed, the indication "A-SYnC" appears on
the display.
Examples of AUTO SYNC
To redo the auto sync process, press the [EXIT] key. The unit returns
to the condition before auto sync was executed. (The newly created
sample is erased.)
When "rESMPL is selected as auto sync type, the sample assigned
to the slave pad will be retained also after auto sync is executed. If
this sample is no longer needed, erase or optimize it (
➔
NOTE
NOTE
40
Matching
BPM
o
f
Pads
(Auto
Sync)
Hit the master and slave pad together, to check whether the tempo is properly matched.
10
STEP
If auto sync was successful, press the [AUTO SYNC] key again to terminate the auto sync
mode.
11
STEP
AUTO SYNC
Pads 1 – 8
Pads 1 – 8
BPM/VALUE
MEASURE
SAMPLE/SONG
BEAT
PAD 1
(Master)
BPM=120
PAD 2
(Slave)
BPM=120
AutoSync
PAD 1
(Master)
BPM=120
PAD 2
(Slave)
BPM=80
PAD 1
(Master)
BPM=120
PAD 2
(Slave)
BPM=240
AutoSync
PAD 1
(Master)
BPM=120
PAD 2
(Slave)
BPM=245
PAD 1
(Master)
BPM=120
PAD 2
(Slave)
BPM=60
AutoSync
PAD 1
(Master)
BPM=120
PAD 2
(Slave)
BPM=50
Summary of Contents for Sampletrak ST-224
Page 1: ...OPERATION MANUAL...
