manualshive.com logo in svg

Zoom PFX-9003, Operation Manual, Page: 53 / 56

Share
Download
Zoom PFX-9003 Operation Manual Download Page 53

ZOOM PFX-9003

53

Troubleshooting 

■

No sound, or very low volume 

• Is the power switch set to ON? 

Verify that correct batteries are inserted or AC adapter is connected, and then 
turn power on. 

• Are [INPUT] jack and [OUTPUT] jack connected correctly to instrument 

and amplifier? 

Refer to "Getting Connected" on page 8 and establish correct connections. 
Check power status and volume settings at instrument and amplifier. 

• Is the shielded cable defective? 

Try replacing the cable. 

• Is PFX-9003 set to mute condition? 

Cancel the mute condition. 

• Is [MIC] key set to ON? 

When the built-in mic is on, the signal from the [INPUT] jack is muted. Press the 
[MIC] key to set the built-in mic to OFF. 

■

Cannot record from [AUX IN] jack, or sound from [AUX IN] jack is 
strange 

• Is input source set to "GT MIC"? 

Set it to "AUX". 

• Is [AUX CENTER CANCEL] switch set to ON? 

When the [AUX CENTER CANCEL] switch is set to ON, the instrument or 
other sound positioned in the center of the signal supplied via the [AUX IN] jack 
is attenuated. Set the [AUX CENTER CANCEL] switch to OFF. 

■

Sound is unnaturally distorted 

Adjust level and GAIN parameters of effect modules. 

■

High noise levels 

Adjust ZNR parameter. If problem persists, try reducing GAIN. 

■

Cannot play rhythm pattern or volume is very low 

• Is rhythm volume set to low value? 

Increase LVL parameter to suitable setting. 

■

Cannot record from built-in mic 

• Is DRIVE module set to ON, or is a type other than MIC PRE or CABI 

selected? 

Set the DRIVE module to OFF, or select MIC PRE or CABI. 

Summary of Contents for PFX-9003

























































Reviews:

No comments