Effect Types and Parameters
ZOOM PFX-9003
47
LOWBST
0 – 10
Emphasizes the low frequency range.
SIZE
1 – 10
Adjusts the size of the simulated space.
WETLVL
0 – 30
Adjusts the effect sound mixing amount.
DRYLVL
0 – 30
Adjusts the direct sound mixing amount.
TYPE
1 – 16
Selects the pitch change type caused by ARRM (see
table 4).
Table 4: TYPE
Setting Output
pitch
1
Semitone lower
→
original pitch
2
Original pitch
→
semitone lower
3
Doubling
→
original pitch
4
original pitch
→
doubling
5
Original pitch
→
1 octave higher
6
1 octave higher
→
original pitch
7
Original pitch
→
2 octaves lower
8
2 octaves lower
→
original pitch
9
1 octave lower + original pitch
→
1 octave original pitch
10
1 octave original pitch
→
1 octave lower + original pitch
11
Perfect fifth lower + original pitch
→
perfect fourth original pitch
12
Perfect fourth original pitch
→
perfect fifth lower + original pitch
13
0 Hz + original pitch
→
1 octave higher
14
1 octave higher
→
0 Hz + original pitch
15
0 Hz + original sound
→
1 octave original pitch
16
1 octave original sound
→
0 Hz + original pitch
◆
REV module
HALL
Reverb effect which simulates the acoustics of a concert hall.
Parameter 1: TIME
Parameter 2: TONE
Parameter 3: MIX
[A]
ROOM
Reverb effect which simulates the acoustics of a room.
Parameter 1: TIME
Parameter 2: TONE
Parameter 3: MIX
[A]
SPRING
Reverb effect which simulates a spring type reverb machine.
Parameter 1: TIME
Parameter 2: TONE
Parameter 3: MIX
[A]
MN-DLY
Mono delay with a duration of up to 1.9 seconds.
Parameter 1: TIME
Parameter 2: FB
Parameter 3: MIX
[A]
PP-DLY
When two amplifiers are used, this serves as a ping-pong delay effect with a
duration of up to 1.9 seconds. When one amplifier is used, the effect is a mono
delay.
Parameter 1: TIME
Parameter 2: FB
Parameter 3: MIX
[A]