ZOOM PFX-9003
42
Effect Types and Parameters
In this section, all effect types and parameters of the modules in the PFX-9003
are explained. The effect types and parameters that can be used in each
module are listed below.
The
[A]
symbol indicates that this parameter can be assigned to the ARRM
function. The parameters shown in black reverse are assigned to sliders in
play mode.
◆
COMP module
COMP
Compressor module that serves to keep signal levels within a certain range.
Parameter 1: SENS
Parameter 2: ATTACK
Parameter 3: LEVEL
LIMIT
Limiter that attenuates signal peaks.
Parameter 1: THRESH
Parameter 2: ATTACK
Parameter 3: LEVEL
Parameter description
Parameter name
Setting range
Explanation
SENS
0 – 10
Adjusts the compression input sensitivity.
ATTACK
0 – 10
Adjusts the speed with which the effect becomes active.
LEVEL
1 – 8
Adjusts the module output level.
THRESH
0 – 10
Adjusts the limiter action threshold.
◆
DRIVE module
* Parameters for type J-CLN to type FDR B are the same.
J-CLN
Clean sound that simulates a transistor combo amp.
US-CLN
Clean sound that simulates a built-in type vacuum tube combo amp.
US-DRV
Drive sound that simulates a built-in type vacuum tube combo amp.
TWEED
Small built-in vacuum tube combo amp sound with dry distortion.
CLASSA
Unique crunch sound that simulates a British-style combo amp.
UK-CRU
Crunch sound that simulates a British-style vacuum tube stack amp.
UK-DRV
Drive sound that simulates a British-style vacuum tube stack amp.
CMB335
Simulates a vacuum tube combo amp characterized by long sustain.
MTLPNL
High-gain drive sound that simulates a vacuum tube stack amp.
BLKBTM
Simulates a vacuum tube stack amp with fat lows and delicate distortion.
SLDN
Drive sound that models a high-gain amp suitable for lead.
FZ-STK
Sixties sound typical of a Fuzz unit played through an amp stack.
TE B
Simulates a bass amp with a distinctively clean low-mid range.
FDR B
Simulates a bass amp with vintage-style drive.
Parameter 1: GAIN
[A]
Parameter 2: TONE
Parameter 3: LEVEL