Inserting the Batteries
ZOOM PFX-9003
5
■
ARRM (Auto-Repeat Real-time Modulation)
The newly developed ARRM
feature lets you vary effect
parameters in real time, using
internally generated control
waveforms whose level changes
periodically. For example, if you
control the wah effect with
ARRM, the wah frequency will go
up and down. The ARRM
modulation speed is synchronized to the rhythm pattern tempo.
Inserting the Batteries
To use the PFX-9003 on battery power, insert batteries as shown below.
1.
Turn the unit over and open the battery compartment cover.
2.
Insert four IEC R03 (size
AAA) batteries into the
battery compartment. The
use of alkaline batteries is
recommended.
The correct (+) (-) orientation of
the batteries is shown inside the
battery compartment.
3.
Close the battery
compartment cover, making sure that the cover audibly snaps
into place.
N
OTE
• When not using the unit for an extended period, remove the batteries to prevent
the possibility of damage by leaking battery fluid.
• When the indication "
" appears on the display, the batteries are almost
exhausted. Replace the batteries as soon as possible with fresh ones.
Time
Wah frequency
Wa..
..ah
Wa.. Wa..
..ah
Four IEC R03 (size AAA)
batteries
RFX-9003 Rear
Battery compartment
Battery
compartment
cover