Effect Types and Parameters
ZOOM PFX-9003
49
◆
ARRM module
Varies parameters cyclically according to the control waveform from an internal generator.
Parameter 1: ASSIGN
Parameter 2: MINVOL
Parameter 3: MODE
Parameter 4: WAVE
Parameter 5: SYNC
Parameter description
Parameter name
Setting range
Explanation
ASSIGN
vL, GA, Md, rv
Selects the control target module. (See table 6.)
MINVOL
0 – 10
Sets the minimum volume when the ASSIGN
parameter is set to VOL.
MODE
UP, dn, Hi, Lo
Selects the change type and width.
WAVE
1 – 8
Selects the control waveform type.
SYNC
0.5 – 3, b1 – b4
Adjusts the control waveform cycle (See table 7.)
Table 6: ASSIGN
Setting
Control target
Setting
Control target
vL
Patch volume
Md
MOD module parameter
GA
GAIN parameter of DRIVE module
rv
REV module parameter
Table 7: SYNC
Setting Cycle
Setting Cycle
5
Eighth note
b1
1 measure
1
Quarter note
b2
2 measures
2
Half note
b3
3 measures
3
Dotted half note
b4
4 measures
◆
TOTAL module
Comprises overall patch settings.
Parameter 1: PATLVL Parameter 4: Patch name (A-Z)
Parameter 5: Patch name (0-9)
Parameter 6: Patch name (symbols)
Parameter description
Parameter name
Setting range
Explanation
PATLVL
1 – 30
Adjusts the patch volume level. A setting
of 25 results in equal input signal and
output signal level.
Patch name (A-Z)
A – Z
Enters alphabet characters.
Patch name (0-9)
0 – 9
Enters numerals.
Patch name (symbols)
+ - @ (space)
Enters symbols.