Zoom H6 Handy Recorder, Operation Manual

Page: 128 / 216

R
ecording
Recor
ding pr
ocess
24
Recording process
Connect Turn power
on (
s"
P.19)
Prepare to
record
Record
(
s
P.24)
Playback and
check (
s"
P.38)
Overdub
and edit
• Connect the XY or
MS mic unit. (
s
P.09)
• Connect mics,
instruments and
other equipment to
Inputs 1–4 . (
s
P.10)
• Start recording:
• Stop recording:
• You can also make
mark settings.
• Pause recording:
• Start playback:
• Stop playback:
• Make settings as desired for
mark, AB repeat (
s
P.42),
playback speed (
s"
P.41)
playback pitch (
s"
P.45),
playback mode (
s"
P.44), and
the project mixer (
s"
P.46).
• You can overdub
(
s
P.35), mix down
to a stereo file
(
s
P.52) and check
project/file
information, for
example.
1. Set the recording format (WAV/MP3).
( s P.83)
• When set to MP3, a stereo mix will be recorded
regardless of the number of tracks.
• You can also make automatic recording (
s
P.29),
pre-recording (
s
P.31), backup recording
(
s
P.34), low cut (
s
P.78), compressor/limiter
(
s
P.79) and metronome (
s
P.76) settings,
for example.
2. Select recording tracks (
s
P.26)
• Use the track buttons to select. When the selected
track indicator lights red, the input signal can be
monitored.
• Press two track buttons at the same time to use
them as a stereo track (stereo link).
3. Adjust input levels
• Use the for each input.
• Adjust so that the level meter stays in the yellow
when the loudest sound is input.
• When connecting a device with a standard output
level of +4 dB or the level stays too high for any
other reason, set the PAD switch to
− 20.
• You can also adjust the side mic level (when using
the MS mic unit) (
s
P.33) and show the VU meters
(
s
P.89), for example.
The recording process includes the following steps.
With the
, a unit of recording/playback data is called a project.