4 characters of the Cable MAC address of the unit, which can be found on the label on the
bottom of the cable modem/router or enter the Pre-Shared Key you previously created. In the
unlikely event that you set up WEP security, enter the WEP Key.
•
Click
Connect
.
If you have difficulty connecting, make sure you have entered the correct Pre-Shared Key or
WEP Key. Then perform a power cycle on your computer and the Cable Modem/Router as
described in
Appendix B: Troubleshooting Tips
.
3
In the
Successfully connected to [desired network]
dialog box, you have three options. You
can:
•
Select
Save the network
and
Start this connection automatically
if you always want to
connect to the same network. Then click
Close
. The next time you start your computer you
will automatically connect to the selected network.
•
Select
Save the network
and clear the
Start this connection automatically
check box if
you don't want to automatically connect to this network every time you start your computer
but you will want to connect in the future. Click
Close
to display the
Select a location . . .
dialog box where you choose a location.
If
the
User Account Control
dialog box appears, click
Continue
.
•
Click
Close
to complete the connection procedure. Select this option if you are connecting
to this network only one time.
To disconnect from the current network:
1
Right-click the wireless network icon in the notification area of the Windows taskbar.
2
Right-click
ZOOM
and select
Disconnect
.
Connecting a Windows Vista Computer with Built-in Wireless
Capabilities
1
From the
Start
menu select
Connect to
.
2
In the
Connect to a network
dialog box, highlight
ZOOM
(or the SSID you changed it to) and
click
Connect
. (The cable/modem router comes set up with default security. The default security
mode is WPA-PSK/WPA2-PSK. In the unlikely event that you have disabled security (described
in the section
Disabling Security
), you do not need to enter the Pre-Shared Key; so you should
skip step 3 and proceed to step 4.)
3
Enter the default
Pre-Shared Key
which is
zoom####
where
####
represents the last 4
characters of the Cable MAC address of the unit, which can be found on the label on the bottom
of the cable modem/router or enter the Pre-Shared Key you created if you changed it from the
default. In the unlikely event that you set up WEP security, enter the WEP Key.
99
Summary of Contents for 5350
