5
From the
WEP Encryption
drop-down menu, select
WEP-64 bit
(
or WEP-128
bit for more
security).
6
For
Network Key 1
, you can either enter your own WEP Key or you can have WEP Keys
generated.
If you are entering a network key of your choice, enter 13 ASCII characters or 26 hexadecimal
digits for 128-bit encryption keys. Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit
encryption keys.
Otherwise, type something into the text box and click on
Generate WEP Keys
and WEP Keys
will automatically be generated for you.
Caution!
Do not click
Apply
until you have entered WEP Keys.
7
Click
Apply
.
Every wireless network client needs to be set individually. Open the wireless configuration software
that came with the device, which should be running on the computer where the device is installed.
(Tips for finding the wireless configuration section of your device can be found in
Appendix A
.)
Find the configuration menu for security, choose
WEP
, and enter
the
Network Key
, exactly as you
entered it or exactly as it was generated for you on the Cable Modem/Router
Wireless
page.
Your security setup configuration is now complete!
Disabling Security
If for some reason you need to set up an unsecured network, you will need to disable the default
security that is currently set up for your cable modem/router. Follow the instructions below.
1
Open the Zoom Configuration Manager by typing the following in your Web browser's address
bar:
http://192.168.0.1
2
In the
Enter Network Password
dialog box, type the following User Name and Password in
lower case, then click
OK
..
User Name:
admin
Password:
admin
(The User Name and Password entered here are not the same as the User Name and Password
that your Internet service provider may have given you.)
3
Click
Wireless
on the top menu.
4
Then click
Primary Network
on the left-side menu and in the text box labeled
Network Name
(SSID)
, type an SSID of your choice. The SSID needs to be at least one character long, and it’s
probably best to pick a name that you’ll recognize as yours.
5
Set all the following drop-down menus to Disable: WPA, WPA-PSK, WPA2, and WPA2-PSK.
6
Click
Apply
.
19
Summary of Contents for 5350
