5
、
FOOT PEDAL COMPONENT
44
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251112-002093 M6×30 Hexagon flange bolts (color Zinc)
1
4
1250301-020093 GB6170M6 (environmental color)
1
5
1274200-035194 ZT310 front fender liner(Black Zinc)
1
7
1250301-018093 GB6170 M6-LH(color Zinc )
1
Fig.3 FOOT PEDAL
COMPONENT
Front left pedal mounting position adjustment
2
1251700-059093
Flanging bushingφ6.4×φ9×8
＋
φ18×2(environmental
color)
1
3
1250105-278093
GB5789 M10×1.25×25 (10.9 grade environmental
protection color)
1
6
1274100-041000
ZT250-S shift lever adjusting screw φ10×150(Black
Zinc)
1
PROCEDURE:
●
Move front left pedal back
Remove according to the steps of removing the shroud.
Remove according to the steps of removing the shroud.
Use a 10# open-end wrench to loosen the nut
⑷
, bushing
⑸
, screw
⑹
and nut
⑺
.
After grasping the shift lever firmly, use an 8# Torx wrench to remove the bolt
⑴
and remove the bush
⑵
. Use
a 14# Torx wrench to remove the bolt
⑶
and install a hole in the rear of the front left pedal assembly.
Assemble the bolt
⑴
, bushing
⑵
and bolt
⑶
.
Remove the bushing
⑸
, assemble the nut
⑷
, screw
⑹
and nut
⑺
, adjust the shift lever to the proper
position, and then tighten the nut
⑷
and nut
⑺
. There is no need for a bushing
⑸
to install a hole in the
back.
CAUTION:
●
Ensure the motorcycle is well supported during manipulation. Avoid falling accident.
●
The height of gear shift rod should be ajusted to a suitable range. Otherwise the riding experience would be
influenced.
