11
、
REAR COVER COMPONENT
110
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1250205-040095 GB70.1 inner hex bolt M8×16
（
color Zinc
）
4
2
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
1
3
1244200-062100 ZT310-V backrest rubber (improved)
1
4
1244200-005000 ZT310-R buffer rubber of head cover
1
5
1274200-146000 ZT310-V backrest rubber mounting bracket
1
6
4024200-074051 ZT310-V rear back (dark grey matte)
1
7
4044201-257051 ZT310-V rear tail skirt small cover (dark gray matte)
2
8
4044201-258051 ZT310-V rear decoration cover rear cover
2
PROCEDURE:
●
Backrest assembly componen
Using 6# inner hexagon socket remove the bottom two bolts
⑴
.
Hold the backrest assembly and remove the two upper bolts (1) with 6# inner hexagon. Remove the backrest
assembly from the vehicle.
Flip to the back and remove the bolts
⑵
with the 4# inner hexagon socket.
Divided the backrest
⑹
and backrest rubber
⑶
.
Remove the holder
⑸
from the backrest.Remove buffer
⑷
from the holder.
●
Without backrest
If without the backrest will send four units small cover and double tape to block up the hole of the rear
backrest.
CAUTION:
●
Remove the side cover, seat cushion, and cover decoration cover in advance.
●
The material should be protected during discomponent to prevent damage to the paint.
Fig.2 REAR COVER
COMPONENT
Backrest assembly component
9
1244200-090000
ZT310-V rear end skirt front small cover double-sided
adhesive tape
4
without
backrest
7
9
8
