ZONGSHEN CBS300, Maintenance Manual

Page: 37 / 50

共 50 页 第 37 页
Page 37 of 50
左曲轴箱盖的拆卸
Removal of Left Crankcase Cover
1
、 拆下
3
颗双联齿轮盖螺栓
GB16674
小盘
M6×20 ，将双联齿轮盖、双联齿轮、双联齿
轮轴依次取下
Remove the 3 small GB16674 M6×20
pan-head bolts of duplicate gear cover,
and then remove the duplicate gear cover,
duplicate gear and duplicate gear shaft in
sequence.
2
、 拆下压线板螺栓
GB16674
小盘
M6×12
，取
下压线板
Remove the small GB16674 M6×12
pan-head bolts of cable crimping board,
and remove the cable crimping board.
3
、 拆下左盖螺栓：
5
颗
GB16674
小盘螺栓
M6×40
、
2
颗
GB16674
小盘螺栓
M6×50
、
1
颗
GB16674
小盘螺栓
M6×25
Remove the left cover bolts: 5 small
GB16674 M6×40 pan-head bolts, 2 small
GB16674 M6×50 pan-head bolts and 1
small GB16674 M6×25 pan-head bolt.
4 、 取下左盖，左盖 2 定位销、纸垫。
Remove the left cover, its two dowel pins
and payer gasket.
磁电机定子的拆卸
Removal of Magnetor Stator
1
、 拆下传感的
2
颗
GB5783
螺栓
M5×16
紧固
螺钉；
Remove the 2 pieces of GB5783 M5×16
fastening bolts of the sensor.
2
、 拆下定子线圈的
3
颗
GB5783
螺栓
M5×25
紧固螺钉，然后从左曲轴箱盖上拆下磁电机
定子组合。
Remove the 3 pieces of GB5783 M5×25
fastening bolts of the stator coil, and then
remove the magnetor stator assembly
from the left crankcase cover.
M6×20
M6×12
M6×40
M6×50
M6×25