GEN III
– VVT
System Configuration
ENTER SYSTEM
CONFIGURATION
70.3
11:08 AM FRI
F
o
set
Menu
for 10 seconds
and
To enter System Configuration
Press and hold MENU button followed by the SET button simultaneously until System Configuration is displayed.
then use the UP and DOWN button to scroll through the system configuration options.
set
Menu
Monitor Thermostat
One wireless zone thermostat in the system is enabled as the Monitor Thermostat and synced with the GEN III
controller to interact and initiate control decisions for the system, the Monitor coordinates global or individual
schedules for the system, locks thermostats individually and provides a user interface to make adjustments
and establish master temperature settings individually or globally for the system. This user interface provides
diagnostic functions to streamline system troubleshooting along with air balance shortcuts, password
protection and more functions are also enabled at the Monitor Thermostat.
The Monitor Thermostat performs all the functions of a zone thermostat along with its active System
Configuration menu to access 20 unique functions to control and schedule the GEN III system. To access the
System Configuration menu use options 1-20 outlined below:
System feature changes are configured at the MONITOR THERMOSTAT for all slave stats and the GENIII
System controller.
OPTION ITEMS:
1)
SCHEDULE
2)
LOCK
3)
MASTER TEMP SET
4)
SYSTEM DIAGNOSTIC
5)
HIGH/LOW LIMIT CONTROL
6)
SECOND STAGE DELAY
7)
OVERRIDE HOURS
8)
PRIORITY VOTE
9)
FAN MODE
10)
UNIT TYPE
11)
SYNCING MONITOR THERMOSTAT
12)
MAVERICK VOTE
13)
SYSTEM AIR BALANCE
14)
TEMP FORMAT
15)
SET SYSTEM CLOCK
16)
PASSWORD
17)
NUMBER OF DAMPERS
18)
LAT CALIBRATION
19)
MORNING WARMUP
20)
MFG DEFAULTS
26
