Q00110 Rev A 8/06
Page 210 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
6.
Remove the four (4) 2.5mm Allen / hex-head screws
that retain the LCD Display to the metal
hinge assembly, ensuring to support the LCD Display while removing the last screw.
CAUTION
Be sure to support the display to prevent damage during removal or installation.
NOTE: If supporting the LCD Display while removing the screws is difficult, a small box or like
object of appropriate height in conjunction with foam padding may be used to support the
monitor during removal and installation (as shown below).
7.
Remove the old LCD Display.
8.
Acquire the replacement display and hold it in position on the protective pad (aligning the
threaded screw holes with the mounting holes in the metal hinge plate).
9.
Initially start each of the four (4) mounting screws, and then fully tighten once all screws are in
place.
10.
Reverse the previous disassembly procedure steps, for completing the installation of the new LCD
display.
20.4.6 Casters/Wheels - Removal/Replacement (miniCart)
Required Parts
Summary of Contents for Z.ONE
Page 1: ......
