Q00110 Rev A 8/06
Page 186 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
3.
Remove the cables and set the hinge housing assembly aside.
Removal of the Top Rear Panel Cosmetics
1.
Remove the rubber transducer inserts.
2.
Remove seven (4) #1 Philips screws located on the top of the top rear panel and three (3) #1
Philips screws from below the transducer holder area.
3.
Remove three (3) T8 – Torx screws from rear of cart near rear handle.
4.
Lift top rear panel vertically and remove the LCD monitor cables from the cosmetic panel so that
they are free.
5.
Disconnect the speaker cable and remove the top rear panel.
Summary of Contents for Z.ONE
Page 1: ......
