Inspection and Cleaning instructions
9650-000820-01 Rev. K
Propaq M Operator’s Guide
17-3
Cleaning Cables and Accessories
Cables, cuff tubing, and other accessories can be wiped clean with a damp cloth moistened in a
mild detergent solution or according to manufacturer's instructions.
Loading Recorder Paper
When the Propaq M unit is equipped with the optional printer, it displays the message
PRINTER OUT OF PAPER
when the printer is activated without recorder paper or if the supply
runs out during printing.
Use ZOLL recorder paper (part number 8000-000901).
To load the recorder paper into the printer:
1. Insert your fingers into the indentations on the sides of the printer door, pull the door open,
then remove any paper from the spool.
2.
Refer to the illustration inside of the paper compartment for proper paper orientation, and
place a new roll of recorder paper on the empty spool.
3.
Pull enough paper off the spool so that paper extends out of the unit when the printer cover
is closed.
4.
Close the printer door. Be sure the cover is flush with the side of the unit.
•
After the paper is loaded, press the
quick access key
(
)
to resume printing.
