20X Bar-tacking and Button Sewing Machine(LCD N) Update Pattern Data by USB Disk
80
the U disk are the same with those in the panel, the patterns with the same number in the panel will be
replaced.
In addition, apart from the pattern update import operation under function number “01”, user can also
change the function number to “02” and “03” to export and delete patterns respectively. To change
function number to “02” means to back up imported patterns, while to change function number to “03”
means to delete all patterns numbered 101~200, which may be done when external pattern storage area is
full or the data format of the external pattern storage area is abnormal.
7)
Open pattern lock: after update, if the patterns updated
via U disk cannot be selected on the sewing interface,
the possible reason is that the pattern lock is unopened,
for the default setting of patterns number 101~200 is
locked and unable to be selected. User need make the
following operation:
When sewing LED is off, press
to enter
system menu, press
key to select “03
normal pattern lock” and press
key to enter.
Under this mode, the left part A displays the normal
pattern number, and user can press
key
to change from 1~200; the right part B display the
pattern status, “ON” for open and “OFF” for lock. User
can press
to open or lock the pattern.
8)
Use
key and
key to open the pattern, press
key to save and return to the
system menu, and then press
key again to return to the normal sewing mode.
