Operation and Debugging 20X Bar-tacking and Button Sewing Machine(LCD N)
55
Presser foot moves and lifts and sewing LED lights up to enter sewing status.
Note: press READY key and the presser foot will return to the sewing start. The presser foot will lower down
before moving. Therefore, please watch your fingers.
* Press
key to save the set value of pattern No., XY scale rate, etc.
* Press
key again, and sewing LED will be off. At that time, user can change the setting of each item.
* Please confirm the pattern No. first. Otherwise, press
key will initiate error M-306. At that time, user
need reset the pattern No.
Note: if user turns off power before pressing
key, the set value of pattern No., XY scale rate, max.
rotation speed and thread tension will not be saved.
2.4.3
Pattern Shape Confirmation
Warning!
1. After selecting the pattern, user must confirm the pattern shape. If the pattern shape is away from the
presser foot, the needle may collide with the presser foot and break.
2. When confirming the pattern shape, please note that if user press +/- keys when the needle bar is down,
the needle bar will lift automatically before the presser foot moves.
1)
Press
key and sewing LED will light up.
2)
Press
key to display “Pattern Shape
Confirmation”.
2.4.4
Sewing
Sewing:
1
．
Put sewing material under presser foot.
2
．
Step pedal to level 1 to lower the presser foot and
release the pedal to lift the presser foot.
3
．
Step pedal to level 2 to start sewing.
4
．
At sewing end, presser foot will lift and return to
sewing start.
