background image

1

© Copyright 2008 Zoeller Co. All rights reserved.

 

Congratulations on the purchase of the Zoeller 820 Series 

submersible grinder pump. For over sixty years the name Zoeller 

has  rep re sent ed  the  standard  for  sub mers ible  de w a ter ing  and 

sew age pumps. The same high quality work man ship and easy 

main te nance design has been in cor po rat ed into this line of 

heavy-duty sub mers ible grinder pumps. This Zoeller pump will 

pro vide years of trou ble-free service when installed ac cord ing 

to the manufacturer’s recommendations.

 

This  manual  in cor po rates  the  in stal la tion,  operation,

maintenance, and service instructions into one doc u ment to aid 

Model Number:

 ______________ 

 Date Code:

 _______________

 Automatic   

 

Nonautomatic 

 Packaged 

System 

 Field 

Assembled 

System 

Job Name: ____________________________________________

Distributor:

 ____________________________________________

Date of Purchase:

 _________

  Zoeller S/O No.:

 ______________

Contractor:

 ____________________________________________

Date of Installation:

 ____________________________________

System Readings During Start-up:   Voltage

 _____

 Amps 

______

 

OWNER’S MANUAL

MODEL 820 SUBMERSIBLE GRINDER UNITS

in the own er ship of a Zoeller submersible wastewater prod-

 uct. Please read and re view this manual before installing the 

prod uct. Follow the steps in this manual for a proper start-up. 

Many items con tained with in, when fol lowed cor rect ly, will not 

only ensure a long and prob lem-free life for the pump, but also 

save time and money during installation. Ref er ence FM1531 

for re place ment parts on 820 Series Grind er Pumps. Should 

fur ther as sis tance be necessary please call our Tech ni cal 

Ser vice  De part ment  at  1-800-928-PUMP  (7867).

Owner’s Information

Table of Contents

Safety Instructions ....................................................................... 1
Limited Warranty .......................................................................... 2
Preinstallation Checklist .............................................................. 3
General Information ..................................................................... 4
Pump Wiring Instructions ............................................................ 5
Typical Indoor Prepackaged System .......................................... 6
Indoor Prepackaged Installation Instructions ........................... 7
Typical Outdoor Prepackaged System ....................................... 8
Outdoor Prepackaged Installation Instructions ........................ 9
Operation ..................................................................................... 10
Cutter Maintenance .................................................................... 11
Service Checklist ........................................................................ 12

Safety Instructions

TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MA-

 JOR PROPERTY DAMAGE, READ AND FOLLOW ALL SAFETY 

INSTRUCTIONS IN THIS MANUAL AND ON THE PUMP.

THIS MANUAL IS INTENDED TO ASSIST IN THE IN STAL LA TION 

AND OPERATION OF THIS UNIT AND MUST BE KEPT WITH 
THE PUMP.

This is a 

SAFETY ALERT SYMBOL.

When you see this symbol on the pump or in the 
man u al, look for one of the following signal words 
and be alert to the potential for personal injury or 
property damage.
Warns of hazards that 

WILL

 cause serious personal    

injury, death or major property damage.
Warns of hazards that 

CAN 

cause serious personal 

injury, death or major property damage.
Warns of hazards that 

CAN 

cause personal injury 

or prop er ty damage.
INDICATES SPECIAL INSTRUCTIONS WHICH ARE 
VERY IMPORTANT AND MUST BE FOLLOWED.

THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS 

PRIOR TO PERFORMING ANY WORK ON THIS PUMP.

MAINTAIN ALL SAFETY DECALS.

PUMPS WITH THE “UL” MARK AND PUMPS WITH THE “US” 

MARK ARE TESTED TO UL STANDARD UL778. CSA CERTIFIED 

PUMPS ARE CERTIFIED TO CSA STANDARD C22.2 NO. 108.

REFER TO WARRANTY ON PAGE 2.

SECTION: 6.10.020

                   

FM2167

1008

Supersedes

0906

NOTICE TO INSTALLER: Instructions must remain with installation.

Product information presented 

here re 

fl

 ects con di tions at time 

of  publication. Consult factory 

re gard ing  dis crep an cies  or 

in con sis ten cies.

MAIL TO:

  P.O. BOX 16347 • Louisville, KY  40256-0347

SHIP TO:

  3649 Cane Run Road  • Louisville, KY  40211-1961

(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624

visit our web site:

www.zoeller.com

Summary of Contents for 820













Reviews: