![background image](http://html1.mh-extra.com/html/zodiac/vx65-iq-vortex-pro/vx65-iq-vortex-pro_owners-manual_4120980021.webp)
Motion Control - Tilt your smart device up (backward), down (forward), left (rotate
left), and right
(rotate right) to direct the cleaner. When you first enter motion control
mode, it will automatically calibrate to your hand position. If you want to re-calibrate
the positioning, press the icon in the upper left hand corner.
3.
To exit Remote Control mode, press X.
NOTE: If you experience significant delays between the app command and cleaner response, you may have
a weak Wi-Fi signal or other connectivity challenges that interfere with the immediacy of the remote
control functions. (For more information, see Using iAquaLink in Wi-Fi to Phone Mode.)
Lift System
The Easy Lift Removal System is designed to assist in retrieving the robot from the pool.
Lift System can be activated at any time during or after a cleaning cycle.
IMPORTANT: Only use Lift System when in view of the cleaner.
1.
From the main screen, select Lift System to enter automated procedure.
2.
Use the left and right arrow icons to rotate the cleaner to face the wall of your
choice.
3.
Press the Lift System icon to drive the cleaner up the wall it is facing. The cleaner
will wait at the water line to be retrieved.
NOTE: To stop the procedure at any time, press and release the button again.
4.
When in reach, grab the cleaner handle and begin to pull cleaner out of the water.
The cleaner will quickly expel water to allow for lighter, easier removal.
NOTE: Never lift the cleaner out of the pool by the floating cable.
5. Press
X to leave the Set Cleaning Mode page and return to the main screen.
Program or Cancel Recurring Cleaning Schedules
You can program recurring cleaning schedules using iAquaLink
™
Control. It is still
recommended to remove and clean the filter canister after every cleaning cycle.
1.
From the main screen, either select the area titled Next Cleaning Cycle or go to
System Settings and choose Edit Schedule.
2.
To program a recurring cleaning schedule, select the day of the week when you
want the cleaner to run.
3.
Select a start time to begin the cleaning cycle.
You may choose to display the start time in standard or 24-hour time in system settings.
4. Press
Save to store the cleaning schedule or Cancel to discard.
5.
Repeat steps 2-4 to program additional recurring cleaning schedules.
NOTE: Only one programmed cleaning cycle can be scheduled each day. The cleaner will attempt to perform
a cleaning cycle every week at the day/time it is programmed unless the schedule is changed or
canceled. Cleaning cycle duration is determined by the choices made when setting Cleaning Mode.
Page
21
Zodiac
®
VX65iQ Robotic Pool Cleaner
|
Owner's Manual