_______________________________________________________________________________51
If you want to scan a priority channel and the
current radio channel:
15. Use or to select PRIO CH.
16. Press [Menu] to select
17. Use [UP]or[DN]to select priority channel.
18. Press [Menu] to select.
19. Press [SC] to start the scanning.
20. Press [SC] or [PTT] to stop the scanning.
Battery save
If the battery save function is activated, the radio
will enter save mode when it has not been receiving
or transmitting for a predetermined time in order to
save battery power. When the function is activated,
you will have a small delay when transmitting /
receiving, because it will use a short moment to
wake up. Therefore you should wait a short
moment after you have pressed the PTT button
before talking in order to avoid that your first word
not being sent.
To enable the battery save function:
1. Press [Menu] to enter menu mode.
2. Use[UP]or[DN]to scroll list until BATT
SAVE is shown.
3. Press [Menu] to select.
4. Use[UP]or[DN]to select YES or NO.
5. Press [Menu] to confirm.
Reset
This function reset the radio to
default
settings.
To reset to factory default settings:
1. Press [Menu] to enter menu mode.
2. Use [UP]or[DN]to scroll list until RESET is
shown.
3. Press [Menu] to select.
4. Use[UP]or[DN]to select YES or NO.
5. Press [Menu] to confirm.
