50_____________________________________________________________________________
To enable the VOX function:
1. Press [Menu] to enter menu mode.
2. Use [UP]or[DN]to scroll list until VOX is
shown.
3. Press [Menu] to select.
4. Use [UP]or[DN] to scroll list until VOX is
shown.
5. Use[UP]or[DN]to select desired level.
6. Press [Menu] to confirm.
Scanning
This function is used for scanning channels with
radio traffic. When activated, the symbol is
shown in the display. You can choose between 3
sub menus:
SCAN LIST: Scans the channels of your choice
added in the scanning list of the radio.
CTCSS: Scans all the CTCSS sub tones for the
current radio channel.
PRIO CH: Scans between the current radio channel
and a selected priority channel.
1. Press [Menu] to enter menu mode.
2. Use[UP]or[DN]to scroll list until
SCANNING is shown.
3. Press [Menu] to select.
If you want to create a scanning list and scan the
channels in the list:
4. Use or to select SCAN LIST.
5. Press [Menu] to confirm.
6. Use [UP]or[DN] to select channel.
7. Press [H/L] and select [Yes] to add
channels to the list
and [No] to skip the channel.
8. Repeat 6 and 7 if you want to add more
channels to the list.
9. Press [Menu] to confirm when all desired
channels are added.
10. Press [SC] or [PTT] to stop the scanning.
If you want to scan the CTCSS sub tones for the
current radio channel:
11. Use [UP]or[DN] to select CTCSS.
12. Press [Menu] to select.
13. Press [SC] to start the scanning.
14. Press [SC] or [PTT] to stop the scanning.
