11
97206
DECEMBER 2, 2003 (Round Pool - 1" Rims)
BE SURE:
Liner is heavy - do not attempt to install it yourself.
Pull liner gently - avoid sharp tugs.
Do not cut or trim edges of liner.
All seams must be straight.
The bottom round seam should be positioned evenly around the inside circumference of the pool.
Adjust overhang evenly allowing minimum tension on pool wall.
Choose a warm, sunny day (at least 65°F) to install your liner. The liner is manufactured from a high grade flexible
vinyl material. This material is designed to stretch into shape during installation; therefore, it must be warm enough
to allow for the proper amount of stretch when installed in the pool. To insure a wrinkle-free form fit, install your liner
on a warm sunny day when the temperature is at least 65°F.
a. Carefully open the liner carton. Do not use a knife or sharp instrument to open the box. As you install the liner, inspect
surface for possible punctures.
b. There are two NO DIVING warning decals packaged inside your liner carton. Set them aside in a safe place until your
pool has been filled with water. See STEP 11 for installation of NO DIVING decals.
c. You should have the help of at least four people. Unfold the liner so it resembles a roll of carpet. Lift the liner over the
pool and begin unfolding. Seam side of liner should face the ground.
d. Keep liner away from the cove area of the pool. As you unfold the liner, locate the side seam and position it parallel
to the corrugations in the pool wall (FIG. 14). All other seams should form straight lines across the pool. Be sure seam
is away from skimmer knockouts. Pull liner sides over the top of the pool wall and down the outside. Hold in place with
spring-type clothespins.
e. Adjust the overhang of the liner so it measures the same all the way around the pool. Allow the liner bottom to touch
the ground in the center of the pool area
(FIG. 15).
f.
Start adding water; gently pull liner bottom towards side wall as the weight of the water pushes the liner into place.
þ
þ
þ
þ
þ
þ
OVERHANG MUST BE EQUAL
ALL AROUND POOL
OVERHANG MUST BE EQUAL
ALL AROUND POOL
KEEP LINER
AWAY FROM
COVE AREA
SIDE SEAMS PARALLEL TO
WALL CORRUGATIONS
PULL SIDES OF LINER DOWN
THE OUTSIDE OF POOL WALL
If you have installed a "HUNG" or "U-BEAD" liner, complete frame assembly steps 9 and 10
before adding water.
STOP!
Step 6.
INSTALL LINER
FIG. 14
FIG. 15