39
5.2.10 Deleti ng the programmes
• Press
and browse the menu using the
butt ons.
• Press
to confi rm.
•
The programmes will be reset to 00:00.
5.2.11 Use with a fi ltrati on control panel
In this confi gurati on, the fi ltrati on control panel powers the appliance on and off .
• This connecti on mode is not recommended since the appliance has its own internal ti mers.
•
In order to be controlled by a fi ltrati on control panel, the appliance's programmes must be reset, see
“5.2.10 Deleti ng the programmes”, page 39.
•
Once connected to the fi ltrati on control panel, switch the appliance off and on again.
5.2.12 Slave mode
"Slave"
mode transfers control over the chlorinati on functi on to an external controller. The external controller must
be
connected to the connecti on point
on the low-voltage circuit, see
“2.5 I Electrical connecti ons”.
"Boost"
and
"Low"
modes can sti ll be managed by the controller. However, the appliance's programmes are deacti vated.
Chlorine producti on is maintained at 100%.
•
Connect the external controller to the slave connecti on point on the low-voltage circuit, see
“2.5 I Electrical
connecti ons”.
• Press
and browse the menu using the
butt ons.
Press
to confi rm.
• Press
to exit.
EN