![background image](http://html1.mh-extra.com/html/zodiac/exo-iq-series/exo-iq-series_instructions-for-installation-and-use-manual_4450219023.webp)
21
3.2.2 Preparing the pipe
•
Identi fy a suitable length (minimum 30 cm, without elbow) of straight pipe.
•
Dismantle the POD kit to retrieve the EU pipe adapter (DN50 mm) provided with 2 perforati ons,
see fi gure
.
•
For a DN50 mm pipe, use the EU DN50 mm pipe adapter (or use the DN63 mm bott om collar). Positi on it
on the pipe in a recommended positi on,
see “3.2.1 Recommended positi oning”.
Use a centre-punch or
marker pen to mark the positi on of the holes to be made in the pipe,
see fi gure
.
•
Using the hole saw supplied, cut the 2 feed holes for the POD kit,
see fi gure
.
•
Ensure that the edges of the holes are smooth and deburred,
see fi gure
.
Bott om collar DN63 mm
Pipe adapter DN50 mm
EN