12
Gas Supply
GAS CONNECTION
• All gas connections must comply with national and local codes. The gas supply line
(service) must be the same size or greater than the inlet line of the appliance. This
range top uses a 1/2" NPT inlet. Use appropriate sealant on all pipe joints that are
resistant to gas.
• This range top can be used with natural or liquid propane gas. The range top is shipped
from the factory for use with natural gas.
• For liquid propane gas household installation, the appliance must be converted by a
factory-trained professional, or qualified licensed plumber or gas service company.
• Gas conversion is important for safe and effective use of the appliance. It is the
responsibility of the owner of the range top to perform the appropriate gas conversion
following the directions of the manufacturer.
• The gas conversion procedure is described in this manual and in the package containing
the conversion orifices shipped with every range top.
• Please provide the service person with this manual before work is started on the range top.
DO NOT use an open flame when checking for leaks.
WARNING
NOTE:
Leak testing of the appliance shall be conducted according to the manufacturer’s
instructions. Always check for leaks with a soapy water solution or other acceptable method.
Check for gas leakage on all gas connections between inlet gas pipes of the appliance, the
gas regulator, and the manual shut-off valve. Bubbles will form with a soapy water solution
if there is a leak.
INSTALLATION
