32
STEP 14: CONNECTING THE DRAIN HOSE
IMPORTANT:
Follow all local codes and ordinances.
1. Cut on the marked line as required for your installation. The drain hose’s molded end
will fit 5/8" (16 mm) or 1" (25 mm) diameter connections on the air gap, waste tee,
or garbage disposal.
2. If a longer drain hose is required, you can add up to 42" (1067 mm) of length, for a
total of 10' (3048 mm) to the factory installed hose. Use 5/8" (16 mm) or 7/8"
(22 mm) inside diameter hose and a coupler to connect the two hose ends. Secure the
connection with screw-type hose clamps.
IMPORTANT:
For proper drain operation, the total drain hose length must not exceed 10'
(3048 mm).
3. Secure the drain hose to the air gap, waste tee, or garbage disposal with a screw-
type clamp, using the appropriate method below. See “Drain Preparation” on page
9 if you do not know which method to use.
INSTALLATION
32
Connecting th
e Dr
ain Hose
