20
STEP 4: REMOVE THE KICK PLATE
1. Remove the two kick plate screws with a Phillips-head screwdriver, then remove the
kick plate.
YOU’LL NEED
• Adjustable wrench
• Phillips-head screwdriver
• Power cord
• Strain relief (for electrical connection)
• Three wire nuts (UL listed)
STEP 5: INSTALL POWER
• Turn off the electricity to the dishwasher’s electrical circuit.
• Make sure that the electrical power is turned off at the source.
WARNING
If your house wiring is not 2-wire with a ground, a ground must be
provided by the installer� If your house wiring is aluminum, be sure to
use cUL/UL Listed anti-oxidant compound and aluminum-to-copper
connectors�
INSTALLATION
20
Electrical Connection
