7
ENCLOSURE REQUIREMENTS
This dishwasher is designed to be enclosed on the top and on both sides within a standard
residential kitchen cabinet unit. The installation enclosure must be clean and free of any
obstructions. Below are the minimum recommended cabinet cut-out dimensions based on
the panel ready specifications provided on page 6:
PRE-INSTALLATION NOTES
• For depth, please note the recommended 25" (635 mm) is larger than a standard 24"
(610 mm) depth cabinet due to the depth of the unit itself being slightly larger.
• In order for the door panel of the dishwasher to be flush with the leading edge of the
counter top, the counter top must be at least 25 3/16" (640 mm) deep. This depth
may vary if you install a custom door panel.
• 34" (867 mm) is the minimum height based on legs being at their lowest setting.
• If installing into a corner, allow 2" (51 mm) minimum clearance between the
dishwasher and adjacent cabinet, wall or other appliances. Allow 23 5/8" (600 mm)
minimum clearance from the front of the dishwasher for opening the door, as shown
below.
BEFORE INSTALLATION
7
Enclosur
e Dimensions
