31
YOU’LL NEED
• Adjustable wrench
• Hot water line kit
• Teflon thread seal tape
STEP 13: CONNECTING THE WATER SUPPLY LINE
1. Make sure that you wrapped the 90° elbow with Teflon thread seal tape twice.
NOTE:
After installation, the elbow should face the dishwasher hose channel at the
bottom left.
2. Slide the compression nut, then the ferrule over the end of the water supply line.
NOTE:
If you use braided stainless steel, you do not need a ferrule or compression nut.
3. Insert the water supply line into the 90° elbow.
4. Slide the ferrule against the 90° elbow and secure it with the compression nut.
IMPORTANT:
Make sure that the door spring does not rub or contact the water supply
line or drain hose. Test by opening and closing the door. Reroute the lines if interference
occurs.
INSTALLATION
31
Connecting th
e W
ater Supply Line
