Zlin Aviation
Section 1
Maintenance Manual Aircraft Maintenance Manual
Issued: 01/02/2006
QAP-AMM-Rev02
Date of latest Revision: 23/01/2013
Page Number: 1-39
1.2.8
1200 (One thousand two hundred) Hours Inspection
Note:
make sure that after the inspections, aircraft is free of any tools, parts and debris, and
reinstall all access doors, fairing, seats and so on, removed for the inspection.
Complete entries in log book or any other required records
In addition to the previous inspections carried out the following must be done at 1200 hours
total airframe time.
Level of
certification
Repeat all previous inspection schedules, and in particular the 600 hour
inspection.
LSRMA
Remove all aircraft external fabric and examine the fuselage frame for
corrosion and oxidization evidence. Clean, rectify, and re-paint fuselage.
Dismantle, clean, all tanks, i.e. fuel, oil, water, and hydraulic reservoir.
LSRMA
Engine
See engine maintenance manual.
Propeller
See propeller maintenance manual.
1.2.9
2000 (Two thousand) Hours Inspection
In addition to cumulative inspections, engine must undergo complete overhaul.
See engine manual, and refer to an authorized Rotax service center.