Zlin Aviation
Section 1
Maintenance Manual Aircraft Maintenance Manual
Issued: 01/02/2006
QAP-AMM-Rev02
Date of latest Revision: 23/01/2013
Page Number: 1-23
Wings, Control Surfaces, Fuselage, external Cabin
Level of
certification
1
Check windshield for dust, cracks or dents. Check fuel filler caps for
security
2
Check on the wings that all vortex generators are present correctly fixed (if
installed). Check the right door and hinges. Pins and cotter pins used to fix the door.
Owner
3
Check wing, fuselage and tail surfaces fabric. Clean and remove any mud
or foreign objects or deposits.
Owner
4
Check wing lift struts and their attachments for damage, deformation,
denting and oxidation and ensure attachment bolts are correctly torqued.
Owner
5
Check trailing edges, wing tips, strobes (if installed), ailerons, flaps,
leading edges for damages, security, rod connections, bolts and nuts and free
movements for normal operation. Check for status the gap seals over the flaps. Check
pitot tube. Check the universal joints (and the bolts and nuts) connecting the leading
edges to the fuselage.
Owner
6
Check for damage or free play in stabilizers, rudder and trim control
system (pins, cable and spring). Check all the pins and cotter pins. Check for right
movements and for the correct connection between the push pull tube and horn
coming from the cabin and connected to the elevators with two uniball and two bolts
(with castle nuts and pins). Control the two aluminium triangles connecting the steel
horn of the elevator push pull tube to the elevators itself. Check for security bolts of
these two triangles (one for each elevator).
7
Check under the stabilizers that vortex generators are correctly fixed (if
installed). Check the gap seal for good adherence.
Owner
8
Check rudder horizontal cables .Open the bottom rear inspection plate and
check for rudder cables and pulleys near the rudder.
Owner
9
Check tail surface wire truss.
Owner
10
Control the area inside the battery compartment. Battery and battery box
for security. Electric cables for connections and rust. No lost objects into the fuselage.
Inspection door: closed and fixed after the control.
Owner
11
Check tail wheel attachment to the fuselage. If necessary lubricate wheel
axle. Check tire condition and air pressure inside. Check the two tailwheel springs.
Owner
12
Check tail wheel operation .Check closely the main bolt of the tailwheel
for security and play and the bolts used to fix the leaf spring to the fuselage.
Owner
13 Check the four main bolts connecting the trailing and leading edges to the
fuselage. To do this open the door and check from inside the cabin, the bolts and the
nuts.
Owner