ZKTeco SF1005-V+:
Quick Start Guide
Page 1
ZKTeco SF1005-V+
Open Options Confidential
This Quick Start Guide explains the process of wiring and configuring the ZKTeco SF1005-V+ with the DNA
Fusion Access Control Software. To link the SF1005-V+ with DNA Fusion, an additional wiegand reader and
cards are required for user registration.
SF1005-V+ Diagram
Installation
- The ZKTeco SF1005-V+ should be installed indoors and away from direct
- Wire the Power In cables to power the device. For access
controller communication, wire the Wiegand Out cables to the DAT / CLK (D1 / D0) terminal of the SSP
NOTE
:
For user registration purposes, a wiegand reader needs to be wired to the SF1005-V+ to
link with DNAFusion. The additional reader may be disconnected once the
Badge Number
is linked
to DNAFusion.
- Access User Mgt (Management) and select New User. Register any biometric
and/or card information to the user’s profile.
- In the Access Control option, select Verification Mode and select the
Step 4:
Adding the ZKTeco SF1005-V+ in DNAFusion - Add the SF1005-V+ as a reader. Match the User
profile from the SF1005-V+ to the
Personnel
profile in DNA Fusion.