Page 3
ZKTeco SF1005-V+ : Quick Start Guide
Open Options Confidential
Wiring the ZKTeco SF1005-V+
Follow the steps below to wire the ZKTeco SF1005-V+.
NOTE
:
The industry wiring colors do NOT apply to the ZKTeco SF1005-V+ wiring harness.
1.
Wire
the
Power In
(
12V / GND
) terminals to power the device.
2. To establish communication between the SF1005-V+ to the controller/sub-controller,
wire
Wiegand
Out
terminals to the
DAT D0 / CLK D1
(Reader Port 1 or 2) terminals on the controller/subcontroller.
3.
Wire
the proximity reader to the SF1005-V+.
a.
Wire
the
Wiegand In
to the wiegand reader’s power and data terminal.
b.
Wire
the
Power Out
(
+12V / GND
) terminals to the reader’s power in terminals.
4.
Apply
power to the SF1005-V+.