SA40
User Manual
P a g e
| 13
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
For example: *#1234
4
123456# (You can consecutively enter the password to delete multiple
users.)
2)
Press *#administrator password
4
swipe the card (You can consecutively swipe the card to delete
multiple users.)
For example: *#1234
4
swipe the card (You can consecutively swipe the card to delete multiple
users.)
3)
Press *#administrator password
4
enter the decimal card ID# (You can consecutively enter the
decimal card IDs to delete multiple users.)
For example: *#1234
4
1234567890# (You can consecutively enter the decimal card IDs to
delete multiple users. The actual digits of the card IDs shall prevail.)
Note: You can perform operations consecutively in administrator state. When a card or password is
deleted, the corresponding card-and-password user is also deleted automatically. You can
press * to exit
the state
.
12. Delete All Users
You can delete all users by using two methods.
1)
Press *#
administrator password
5
#
For example: *
#
1234
5
#
2)
In standby state, swipe the administrator card (to enter the administrator state), the deletion card, the
addition card, and the deletion card in sequence.
Note:
Only the card-based, password-based, or card-and-password user is deleted. The administration
card, addition card, and deletion card are not deleted.
13. Modify Administrator Password
Press*#
administrator password
0
new password
#
new password
#.
For example: *#
1234
0
1234567
#
1234567
#
Note: The administrator password must contain 1-8 digits. After the administrator password is set
successfully, the system enters the administrator page.
If you forget the administrator password, you can swipe the administrator card to set a new one.
14. Modify User Password
You can modify the user password by using two methods.
1)
Password-based users: Press *#administrator password
6
old password#new password of 4-6
digits#
For example: *#
1234
6
123456
#
12345
#
