SA40
User Manual
P a g e
| 14
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
2)
Card-and-password users: Press *#administrator password
6
swipe the card
new password of 4-
6 digits#
For example: *#
1234
6
swipe the card
123456 #
Note: You can perform operations consecutively in administrator state and
press * to exit the state
.
15. Set Door Opening Delay Time
Press *#administrator password
7
1
enter the delay time#
For example: *#
1234
7
1
3s#
Note: The door opening delay time is 0-60s. The default value is 3s and the maximum value is 60s.
16. Set Key Backlight
Press*#administrator password
7
5
0/1/2 (0: normally off; 1: normally on; 2: the backlight is off when
you touch the key)
For example: *#
1234
7
5
0/1/2
17. Set Indicator
Press *#administrator password
7
6
0/1 (0: off; 1: on)
For example: *#
1234
7
6
0/1
18. Set Door Sensor Mode
Press *#administrator password
7
4
0/1 (0: NC; 1: NO)
For example: *#
1234
7
4
0/1
19. Set Door Sensor Alarm Delay Time
Press *#administrator password
7
7
enter the alarm delay time#
For example: *#
1234
7
7
15#
Note: The door sensor alarm delay time is 0-255s. The default value is 15s.
20. Set Main Alarm Switch
In standby mode, you can enable or disable the door sensor alarm or the alarm for pressing a key by
mistake through shortcut operations.
1)
Enable the alarms: Directly swipe the addition card for three times to enable the door sensor alarm and
the alarm for pressing a key by mistake.
2)
Disable the alarms: Directly swipe the deletion card for three times to disable the door sensor alarm
and the alarm for pressing a key by mistake.
