ZK Technology L9000 User Manual Download Page 5

Page: 5 / 50

L9000 Fingerprint Lock User Manual

1 Instruction for Use

Functions marked with " " in this manual are only supported by a specific product

or a tailor-made product and will be described below.

1.1 Introduction to Fingerprint Lock Functions

By leveraging the perfect combination of biometrics and cryptography, our

fingerprint locks ensure double security through the finge password

unlocking feature.

The state-of-the-art Organic LED (OLED) display affords crisp bright readouts

and makes our fingerprint locks intuitive and easy to use. You can simply use our

fingerprint locks with ease after following the operation instructions for once.

Support setting of classified privileges for super administrators, administrators

and ordinary users.

Support deletion of all or the specified registration data.

Support Multi language, firmware upgrade and uploading/downloading of user

information and access records through a USB disk.

Fingerprint verification module and password registration; 1: N is used for the

password, and each password is unique.

Dual verification function, i.e., finge fingerprint or finge password.

The opening records can be viewed in offline status. In the menu, all opening

records of the selected user can be directly viewed, in order to find abnormal

opening situation.

Support accurate display of time and date with annual deviation less than two

minutes.

Reserve the rights of modification and explanation

Summary of Contents for L9000



















































Search results

Summary of Contents for L9000

Reviews:

Related manuals for L9000

Brands by name

Popular brands

ZK Technology L9000, User Manual

Search results

Summary of Contents for L9000

Reviews:

Related manuals for L9000

Brands by name

Popular brands