ZK Technology L9000 User Manual Download Page 39

Page: 39 / 50

L9000 Fingerprint Lock User Manual

3.3.2 Download User Data

Press

key on the

PenDrive Mng

interface to move the cursor before the

DwnLoad User

menu item, and then press

key to start download user data. The

files user.dat (user information) and template.dat (fingerprint template) will be

U disk. The method of operation is similar to

3.3.1

Download Logs

, here is no longer to restatement.

to move the cursor before the

UpLoad User

menu item, and then press

key to start upload user data. The files

user.dat (user information) and template.dat (fingerprint template) will be

the fingerprint lock. The method of operation is similar to

3.3.1 Download Logs

, here is no longer to restatement.

key on the

PenDrive Mng

interface to move the cursor before the

Upd

Firmware

menu item, and then press

key to start upgrade firmware. Upgrade

the firmware of the fingerprint lock through the upgrade files in the U disk. The

milar to

3.3.1 Download Logs

, here is no longer to

restatement.

concurrently downloaded to the

3.3.3 Upload user Data

Press

key on the

PenDrive Mng

interface

concurrently uploaded to

Note

: If a user exists with the same User ID in the fingerprint lock, the new upload

will overwrite the existing user data; otherwise, the new user data will be directly

added.

3.3.4 Upgrade Firmware

Press

method of operation is si

Reserve the rights of modification and explanation

Summary of Contents for L9000



















































Search results

Summary of Contents for L9000

Reviews:

Related manuals for L9000

Brands by name

Popular brands

ZK Technology L9000, User Manual

Search results

Summary of Contents for L9000

Reviews:

Related manuals for L9000

Brands by name

Popular brands