Prepare for installation
Minimum installation requirements
Use copper wire that meets the specifications of local wiring regulations. The selected
cable must be capable of withstanding continuous oads of up to 40A at all times. The
selected circuit protection device must incorporate an appropriate wall-mounted residual
current device (RCD) and corresponding electrical load over current protection.
Calculate the distance to ensure minimal voltage drop.
Use only copper conductors.
Calculate the existing electrical load to determine the maximum operating current.
Obtain any necessary permits from the local authority that has jurisdiction and confirm
that the follow-up inspection has been scheduled by an electrician after the installation
is complete.
Installation of the wall charger requires that you:
●
●
●
●
●
Prepare for installation
Position
Ensure that the parking position is within range of the charging cable.
Install in a well-ventilated space. Avoid installation in enclosed boxes or close to high
power appliances.
For outdoor installations, waterproof protection is recommended but not mandatory.
If installed in an enclosed garage, choose to install on the side of the EV charger slot.
There is enough clearance for the charging cable to wrap around and the charging
handle can be comfortably positioned on the side of base.
●
●
●
●
●
Height
Recommended height: 47 in (~1.2 m)
Maximum height (indoor and outdoor): 60 inches (1.5 m)
Minimum outdoor height: 24 in (0.6 m)
Minimum interior height: 18 inches (0.45 m)
●
●
●
●
P-05
P-06
Maximize wifi signal reception
(for models with wifi function)
For achieving optimal functionality, the Wall Mounted Connector should be connected
to the local Wi-Fi network. To maximize signal reception, avoid installing wall-mounted
connectors against physical obstacles such asconcrete, masonry, metal poles, etc. that
may prevent Wi-Fi signal reception.
Note: If the mobile device can connect to local Wi-Fi in a specific location, the wall-
mounted connector can also be connected.
●
●
