Safety information
Safety information
Specification
P-03
P-04
Features
Operating temperature range: -25 ℃ ~ +55 ℃
With leakage test function, ensure the normal operation of leakage protection.
The charger has a function of automatic reset after troubleshooting. That means when a
charger stop working when an anomaly is detected, the charger will periodically self-
check whether the anomaly is eliminated. The charger will start to work automatically
after ensure the anomaly has been eliminated.
Build-in with overvoltage and under-voltage protection
(
U>264V or U<187V
)，
over-
current protection, over temperature protection, imperfect earth detection, CP abnormal
signal protection and type A + DC 6mA for europe standard.
IP65
(
Socket IP55)protecting rate, operating humidity range 0-95% for indoor and
outdoor.
With temperature sensor build-in important areas for fire protection.
●
●
●
●
●
●
Easy for cable storage.
The ramp-down stop current charging mode protects the EV batteries.
Standard: EN IEC 61851-1 IEC 61851-21-2
Certificate: CE/CB/UKCA/SAA
The EV charger can be wall-mounted or pile mounted.There are three wiring ways for
the EV charger, bottom entry wiring,Top entry wiring and rear entry wiring.You will
need to install the wiring box to make top entry wiring.
Rated charging current can be set according to different home load conditions.
With lightning protection ensure personal safety.
RFID card or auto-start charging for option.
●
●
●
●
●
●
●
●
Description
Voltage and Wiring
Cable Length
EV Charger Dimensions
Frequency
Weight
Current
Standby Power
Operating Temperature
Humidity
Leakage detection
Enclosure Rating
Altitude
Specification
Single-phase or three-phase EV Charger:AC230V±10%;L1
、
N
、
PE Three-phase EV Charger:AC400V±10%;L1
、
L2
、
L3
、
N
、
PE
6-32A
50/60HZ
5M/6M
Height:380mm Width:169mm Depth:151/201mm
6.2KG
-25
℃
~55
℃
2W
<90%No condensation
≤
2000M
TYPE A + DC6mA leakage sensor built-in
IP65
（
Socket IP55
）
