Communication solutions for power utilities
UNIVERSAL POWER-LINE CARRIER SYSTEM TYPE OPU-1
WHOLE BAND QAM MODEM MBPU - Rev. 0 (July 2011)
22/28
S00=002 S06=004 S07=050 S08=002 S09=006 S10=040
S12=050 S23=175 S30=003
USER PROFILE:
B0 C0 E1 F16 L0 M1 N0 P Q0 V1 W1 X4 Y0 &C1
&D0 &G0 &K3 &L0 &M1 &Q1 &R1 &S1 &X0 %E1 \G0 \N0 \P0 \R0
S00=002 S06=004 S07=050 S08=002 S09=006 S10=040
S12=050 S23=019 S30=003
&W
Save active configuration in user profile
The modem will save the active configuration in the user profile.
&X[X]
Synchronous transmission clock
Selects the transmission clock for synchronous connections.
&X0
Internal clock. (by default)
&X1 External
clock.
&X2 Slave
clock.
Z Reset
It is a software reset.
5.2 S
REGISTERS
The modem uses the S registers to control operation. Their contents are determined by the
configuration profile selected, although they can be modified by means of the AT commands
in two ways:
−
By means of the commands that control different configuration parameters and that modify
the corresponding bits of the adequate S registers.
The S registers are listed and briefly described below. The mentioned AT command is the
one that affects the S register in question. The values by default indicated are those of the
three factory profiles. If these values are all the same, only one value is shown.
S3 Return
character
Range:
0 - 127
Units: ASCII
decimal
By default:
13
