Zirkon zahn titanium spectral-colouring anodizer, Operator And Maintenance Manual

Page: 13 / 44

13 13 CHAPTER 1
SAFETY / RESIDUAL RISKS
Workplace, handling, references to safety
- Provide optimal work height.
- Provide sufficient room lighting (at least 500 lux).
- Position the equipment in order to access all operating elements without problems.
Troubleshooting
Only instructed qualified personnel are allowed to undertake troubleshooting.
If a malfunction cannot be rectified through the information provided in the Operator’s
Manual, the Titanium Spectral-Colouring Anodizer must be turned off. Prevent unauthorised
operation. Please contact your Zirkonzahn partner for troubleshooting.
SOURCES OF DANGER AND RISKS
Residual risks
- Avoid residual risks by increased attentiveness.
- Pay attention to risks at the installation site.
- Risk of bruising when handling the device improperly.
- Stab and cut injuries through tools.
- Risk of bruising during transport and installation of the device.
- Defective power supply lines.
Danger of explosion
It is strictly forbidden to use the device in explosive atmospheres and to clean it with solvents.