Zirkon zahn titanium spectral-colouring anodizer, Operator And Maintenance Manual

Page: 12 / 44

12 12 KAPITEL 1
SAFETY / RESIDUAL RISKS
Technical improvements
Zirkonzahn is not required to make to the equipment produced and delivered at earlier stages
technical amendments related to subsequent productions.
SAFETY REGULATIONS
Read and follow the safety instructions in this Operator’s and Maintenance Manual to avoid
danger to persons and damage to property. Your safety comes first!
Safety concept
The safety concept of the Titanium Spectral-Colouring Anodizer as well as this Operator’s and
Maintenance Manual were compiled according to the requirements of the Machinery
Directive 98/37/EC in force until 29/12/2009 and the Machinery Directive 2006/42/EC in
force since 30/10/2009, as well as the European Low Voltage Directive (LVD) 2006/95/ EC.
Personal safety equipment
When working with the Titanium Spectral-Colouring Anodizer, the following personal safety
equipment is required:
- Protective gloves.
- Safety goggles.
Personal safety equipment required by law may vary from country to country.
The user is committed to use the safety equipment in accordance with the national industrial
safety regulations.
Safety measures when cleaning the device
- Safety goggles.
- Face mask.
- Protective gloves.
- Unplug from mains power!