Zirkon zahn titanium spectral-colouring anodizer, Operator And Maintenance Manual

Page: 40 / 44

1o
11
12
9
40 40
CAUTION: Connect the parts in a way that there
is a proper contact between the titanium bases
as well as between the titanium bases and the
Anodizer Multi Holder.
Tighten the wing nut tightly.
Insert the red counterpart of the anode connector
into the opening of the Anodizer Multi Holder.
Place the equipped Anodizer Multi Holder into the
anodising bath and position it centrally.
Place the titanium bases on the mounting rods
after they have been pre-treated according to the
previous instructions.
Then screw in the wing nut.