29
4. Do not disconnect the player from the PC during firmware upgrading or repairing. After the
upgrading is completed, a prompt
“
firmware upgrading succeeded, the program will exit
automatically!
”
pops out. Now confirm, the tool will shut down and reset the player, the whole
upgrading is completed.
Connection to TV/VCR
This player can output audio/video signals to TV/VCR, with the following adapter cables:
1.
For stereo audio signals, an adapter cable that has one stereo 3.5mm male plug and goes into
two RCA male plugs (RED / WHITE) is required.
Connect the 3.5mm plug to earphone socket of this player and connect the RCA plugs to the
RCA audio (RED / WHITE) sockets of the TV/VCR.
2.
For video signals, an adapter cable that has one stereo 3.5mm male plug and goes into one
RCA male plug (YELLOW) is required.
Connect the 3.5mm plug to TV-OUT socket of this player and connect the RCA plugs to the
RCA video (YELLOW) socket of the TV/VCR.
