REINSTALLATION OF SU-S AND INTERCEPTOR FRONT
INSTALLING THE SERVO UNIT AND INTERCEPTOR FRONT
•
Verify the connecting rod moves freely in the backplate.
•
Verify the screw shaft nut is correctly fitted to the connecting rod in the backplate
when mounting the servo unit. Tighten screws with designated torque (2 Nm).
•
Verify the interceptor blades are moving easily (blades shall be easy to move by hand.)
•
Reinstall the front and tighten the screws with designated torque (5 Nm).
•
Run the Interceptor Check and verify that the blades are moving freely within tolerance
range (all the readings of Interceptor Check are in green range). Document and archive the
results for later reference.
11
Instructions of mounting the SU-S and the front to the backplate. Ensure screw shaft nut is fitted correctly to the backplate’s
connecting rod. Tighten the screws with designated torque (2 Nm and 5 Nm, respectively).
Starting Interceptor Check from the Control Panel menu.
Servo unit:
2 Nm (1.5 Ib-ft)
1
1
2
NOTE!
(x3)
T25 (PT 5.0x18)
5 Nm
(3.7 lb-ft)
300 S:
450 S:
600 S:
750 S:
x6
x10
x14
x18
Interceptor front: T30 (PT 6.0x48)
Summary of Contents for S Series
Page 1: ...TROUBLE SHOOTING GUIDE...
Page 12: ......
