Zipro Glow WM, User Manual

Page: 29 / 211

29
EN
STEP 6.
Screw the seat adjustment lock (8) of the
eccentric shaft (19) with the hexagonal bolt
(22).
Screw the seat railing (3) to the seat frame (2)
using bolts (10), washers (15), and nuts (11).
Connect the heart rate cables (41) protruding
out of the seat railing (3) to the connecting
cables (42) protruding from the main frame (1).
STEP 7.
Screw the seat (36) and seat backrest (37) into
the seat frame (2) using hexagonal bolts (14),
and washers (15).
Plug in the power supply unit (52) and plug
the cable into the power socket on the front of
the mainframe.
Congratulations!
You have assembled magnetic bike!
Read the manual carefully before using the bicycle.
ADJUSTMENTS
Handlebar adjustment
Loosen the handlebar adjustment knob. Set the handlebar in the desired position and tighten the knob.
Make sure the handlebar is secured.
Saddle position
Loosen the saddle guide knob. Set the saddle to the desired position and tighten the knob. Make sure the
saddle is secured.
Adjusting pedal straps
Fix the side of the rubber strap with three holes to the internal part of the pedal. Fix the other end to one of
the adjustment opening so that the feet is fixed during training and easy to take out. Repeat for the other
pedal.
MAINTENANCE
Carry out maintenance activities at regular intervals.
The tasks listed below should be carried out at least every 20 hours of operation.
• Check moving parts of the device. If they need lubrication, use a bicycle bearing grease.
• Check the conditions of such parts as bolts and nuts. Make sure they are tight.
52